Categories
- Specials & Limited Stock Items
- LED Lighting
- 4x4 Suspension
- 4x4 Steering
- Driveline Solutions
- Body & Armour
- Recovery Gear
- Wireless Trigger Controller
- RotopaX Containers
- Tailshaft Spacers
- 4x4 Accessories
- Pneumatic Beadlocks
- Merchandise
- Ram Mounts
- Air Compressors
- Wheel Spacers
- Wheel Studs & Nuts
- Brackets & Tabs
- Atlas Transfer Cases
All Brands
Navara NP300 Long Travel Adjustable Upper Control Arms
Have you lifted your Nissan Navara NP300 and have a banging noise coming from the front or lack of adjustment to wheel align.
When lifted the upper arm can come in contact with the coil bucket creating a metal on metal harsh noise due to there being no bump stop.
This not only causes damage but limits down travel.
The other problem the NP300 has is the limited adjustment to wheel align the front after being lifted. The use of the Adjustable arms allows for more travel and extra adjustment when you need to wheel align the front end. Offering up to +2 Camber and -0 to +3 degrees of caster.
The use of a sealed upper ball joints allows for a long lasting unit not like other tubular arms on the market that hold mud and dirt in the open cerferical joint causing a short lifespan.
Note; when ordering online 1 x purchase = 1 x pair (2 x Arms) upper control arms with 2 x greasable ball joints and pivot bushes ready to install.
Add to Order Options:
- 10mm Coil Strut Spacer Kit - #SN-NP300-10CSS
Note: If you have a 2” lift adding the 10mm Coil Strut spacer kit will give you another 1” (25mm) of lift.
No Similar Products By Category Found